Best answer: Can you use RGB for RCA?

RGB (red, green, blue) can be carried by RCA cables, RCA refers to the outer cover/inner plug arrangement you most commonly see with audio cables of the red and white variety. RGB are analog signals, separated by color. … You can’t directly, yellow, white and red are left an right audio and composite video.

Can you plug RGB into RCA?

The Red-Green-Blue RCA ports are video only and cannot be plugged or connected to the RCA Yellow-White-Red ports. The Red-Green-Blue RCA ports are what is known as ‘Component Video’. Component video is pre-cursor to digital HD ports (HDMI usually). … All three are video only and no audio.

Can you use RGB cables for audio?

Yes, it will work, I have done this many times to re-purpose cables installed in home theater and commercial AV. The RGB cables for component video (RGB) and composite video (yellow) are just 75 ohm impedance coaxial cables with RCA ends, same type typically used in red and white for stereo audio.

IT IS INTERESTING:  How do I convert SVG to MP4?

What can I use instead of RCA?

Typically where RGB was used for video, RCA cables were used for audio. Sometimes you can use either and when that is the case, always opt for HDMI.

Can you use red white yellow cables for component?

The AV input you are referring to (yellow, white and red) is composite video (yellow) and stereo audio (red & white). You can use any RCA cable (they’re all the same thing even if they have different coloured heads) to connect composite or component video.

Can I plug RCA into YPbPr?

The same cables can be used for YPbPr and composite video. This means that the yellow, red, and white RCA connector cables commonly packaged with most audio/visual equipment can be used in place of the YPbPr connectors, provided the end user is careful to connect each cable to corresponding components at both ends.

Does RCA work in components?

A cable with RCA connections can be used for SPDIF, audio, composite video and component video without any problems.

Is coaxial and RCA the same?

A Digital Coaxial connection uses a cable that has RCA-type connectors. This digital coaxial cable is different from the standard RCA cable in that it is designed to handle the wider frequency bandwidth of the digital audio bit stream.

Can you use video RCA for audio?

Actually from what I know, Digital cable use 75 ohm cable and Video cable does have the same 75 ohm resistance. However, for Audio RCA use 50 ohm cable. If you use Video cable for Audio, it is allright. But you won’t be able to use Audio RCA as digital cable.

IT IS INTERESTING:  Can I save a Word document as a JPG?

Is RGB the same as AV?

Gordon @ Convergent AV

YPrPb is a lossless analogue compressed version of the RGB signal.

Is HDMI audio better than RCA?

Both RCA component and HDMI work well, but of the two, HDMI is the better choice. It’s a single cable for both audio and video hook-up that delivers superior video quality, surround-sound audio quality, 3D support, and more, verses using many wires using RCA component connections.

Can you splice speaker wire to RCA?

When you’re attaching the speaker wire to RCA plugs, you can connect either the marked or the unmarked side of the wire to the pin, whichever makes sense for you. As long as you do all the wires the same way, they’ll have the same polarity.

What is the difference between HDMI to RCA and RCA to HDMI?

Analog. The basic difference between the signals carried by HDMI and those carried by component connections through RCA connectors is that HDMI is all digital, whereas component video is analog.

What do the colors on RCA cable mean?

RCA connectors and cable are also commonly used to carry S/PDIF-formatted digital audio, with plugs colored orange to differentiate them from other typical connections. … They are often color-coded, yellow for composite video, red for the right audio channel, and white or black for the left channel of stereo audio.

Are RCA cables still used?

RCA or composite cables — the classic red, white and yellow cables you used to use to plug in your Nintendo to the television — are still available on most televisions and some computer monitors. Toss. It’s not the most popular or desirable way to push video or audio, as it’s an analog connection.


What are the red blue and green RCA cables for?

The green cable (also called Y) transmits the brightness information of the signal. The blue and red cables (called Pb and Pr, respectively) transmit the blue and red components of the picture’s color. Green components are inferred by a combination of all three signals.

Lizs Scribbles